基于锥形压入的材料力学性能测试方法研究

通过压入测试以获取工程服役结构、小型构件和焊接结构焊缝过渡区的材料单轴本构关系参数,且根据材料本构关系参数来估算材料的压入硬度对于工程设计和安全评估有重要意义.对于幂律材料,本文依据锥形压入试验原理和弹塑性接触有限元分析(EPFEA),揭示了不同锥角的锥形压头其压入能量比与屈服应力之间存在线性关系,提出了基于能量原理预测金属材料本构关系部分关键参数(弹性模量、屈服应力和硬化指数)的CR-EMI (Constitutive Relationship based on Energy Method of Indentation)方法.同时,基于此种线性关系提出了由Hollomon本构关系模型参数预测硬度的H-EMI(Hardness based on Energy Method of Indentation)方法.通过对多种金属材料进行压入试验和有限元分析,验证了CR-EMI方法和H-EMI方法的有效性与精确性.     

机械蝴蝶模型悬停飞行的流动显示实验

为了探索蝴蝶独特的外形及运动模式下蕴含的流动机理，与以往只考虑翅膀气动影响的拍动翼实验不同，我们开发了一种同时考虑身体及翅膀的机械系统用以模拟蝴蝶的悬停飞行，并采用染色液流动显示的方法对升力的主要来源——前缘涡进行了细致的观测。结果显示，在蝴蝶飞行的上下拍动过程中均有前缘涡产生，且不是以往观测到的螺旋或锥状结构，而是近似等直径的柱状联通形式，其明显特征为：在拍动加速阶段存在明显的展向流动，而在减速阶段则会出现破裂；另外，蝴蝶看似杂乱无章的运动实际上是一种自适应控制的结果，有助于提高升力。     

Mesh-dependence of Material with Softening Behavior

The issue of mesh-dependence emerges when the conventional continuum damage model is applied to handling the softening behavior. In order to circumvent the mesh-dependence, the non-local theory is introduced into the conventional damage model and the finite element formulas are derived for two-dimensional gradient-enhanced damage model. A new element is proposed in which the basic unknown quantities are displacement, non-local equivalent strain and the gradient of non-local equivalent strain. The element and constitutive equation proposed in this article are added to the finite element software ABAQUS through user subroutine UEL. Numerical results show that the gradient-enhanced damage model can eliminate the mesh-dependence and is effective for dealing with the issue of softening behavior.     

Bush有限单元原理及其在航天器结构建模中的应用

利用大量的数值计算确定了MSC.NASTRAN软件中广义弹簧单元（Bush）刚度阵的解析表达式,通过对比Bush元与剪切梁元的刚度阵,推导了Bush元参数与剪切梁刚度参数的对应关系,并利用展开状态的太阳翼结构和大型桁架结构的静力和动力分析验证了推导结果。该研究揭示了Bush有限单元的原理和所有输入参数的物理含义,有助于Bush元在结构有限元分析中的准确使用。     

航天器安全防护保障探讨

把对航天器安全的威胁分为硬和软两大类，分析了对航天器产生威胁的类别，以及为保证航天器安全而需要采取的措施。介绍了研究的内容，需要建设的空间信息对抗系统和空间信息探测网。     

一种基于FPGA的ISA航空总线设计方法

Nios Ⅱ处理器是Altera公司推出的基于SOPC系统的嵌入式软核处理器。在Quartus Ⅱ软件的SOPC Builder工具中,用户可以利用Nios Ⅱ处理器、标准配套外围设备以及用户自定义的逻辑接口IP核来创建适用的Nios Ⅱ嵌入式系统,再将设计下载到Altera公司的FPGA中进行实现。本文在Quartus Ⅱ软件中使用Verilog硬件描述语言创建了基于Avalon总线的ISA总线接口逻辑,并在SOPC Builder中实现对此元件的封装,使之成为可供Nios Ⅱ系统使用IP核。     

圆柱筒轴向载荷下单元尺寸效应数值模拟

利用显式非线性有限元方法对薄壁圆柱筒轴向载荷下的动力学响应进行了研究,模拟了圆柱筒在轴向冲击作用下的动力屈曲变形及其发展过程。分析比较了不同单元尺度下冲击模型的数值计算解与理论解,揭示了在进行有限元模拟时存在的网格尺寸效应,为研究有限元网格尺寸与有限元求解精度的内在联系提供参考;为在保证数值解满足工程实际精度要求的前提下,确定合理的单元尺度,提高有限元分析效率进行了有益的探索。     

Stifness modeling and analysis of a novel 4-DOF PKM for manufacturing large components

Faster response to orientation varying is one of the outstanding abilities of a parallel kinematic machine（PKM）.It enables such a system to act as a reconfgurable module employed to machine large components effciently.The stiffness formulation and analysis are the beforehand key tasks for its parameters design.A novel PKM with four degrees of freedom（DOFs）is proposed in this paper.The topology behind it is 2PUS-2PRS parallel mechanism.Its semianalytical stiffness model is frstly obtained,where the generalized Jacobian matrix of 2PUS-2PRS is formulated with the help of the screw theory and the stiffness coeffcients of complicated components are estimated by integrating fnite element analysis and numerical ftting.Under the help of the model,it is predicted that the property of system stiffness distributes within the given workspace,which features symmetry about a certain plane and is also verifed by performing fnite element analysis of the virtual prototype.Furthermore,key parameters affecting the system stiffness are identifed through sensitivity analysis.These provide insights for further optimization design of this PKM.     

Matching suitable feature construction for SAR images based on evolutionary synthesis strategy

In the paper,a set of algorithms to construct synthetic aperture radar（SAR）matching suitable features are frstly proposed based on the evolutionary synthesis strategy.During the process,on the one hand,the indexes of primary matching suitable features（PMSFs）are designed based on the characteristics of image texture,SAR imaging and SAR matching algorithm,which is a process involving expertise;on the other hand,by designing a synthesized operation expression tree based on PMSFs,a much more flexible expression form of synthesized features is built,which greatly expands the construction space.Then,the genetic algorithm-based optimized searching process is employed to search the synthesized matching suitable feature（SMSF）with the highest effciency,largely improving the optimized searching effciency.In addition,the experimental results of the airborne synthetic aperture radar ortho-images of C-band and P-band show that the SMSFs gained via the algorithms can reflect the matching suitability of SAR images accurately and the matching probabilities of selected matching suitable areas of ortho-images could reach 99±0.5%.     

BP神经网络理论在模型修正的应用

神经网络由于其本身具有的优越性，已广泛应用于各个领域中的分类、联想问题。将神经网络理论用于对利用有限元分析方法得到的系统模型进行修正，从计算结果看，该方法收敛速度快且收敛到全局最优解。